| Data akcji | Marka / Model | Problem | Działanie serwisowe | Zakres produkcji | Ref. producenta | Liczba pojazdów |
|---|---|---|---|---|---|---|
| 2016-09-09 |
KTM - EXC
EXC
|
SKUTECZNOŚĆ HAMOWANIA MOŻE BYĆ ZMNIEJSZONA | Recall the machines that are likely to be affected and check the batch number of the hand brake cylinder. If the batch number appears on the affected list replace the hand brake cylinder. | 2016-06-07 → 2016-07-04 | TI 13_165926 | 439 |
| 2016-09-09 |
KTM - EXC SIX DAYS
EXC SIX DAYS
|
SKUTECZNOŚĆ HAMOWANIA MOŻE BYĆ ZMNIEJSZONA | Recall the machines that are likely to be affected and check the batch number of the hand brake cylinder. If the batch number appears on the affected list replace the hand brake cylinder. | 2016-06-07 → 2016-07-04 | TI 13_165926 | 439 |
| 2016-09-09 |
KTM - EXC-F
EXC-F
|
SKUTECZNOŚĆ HAMOWANIA MOŻE BYĆ ZMNIEJSZONA | Recall the machines that are likely to be affected and check the batch number of the hand brake cylinder. If the batch number appears on the affected list replace the hand brake cylinder. | 2016-06-07 → 2016-07-04 | TI 13_165926 | 439 |
| 2016-09-09 |
KTM - EXC-F SIX DAYS
EXC-F SIX DAYS
|
SKUTECZNOŚĆ HAMOWANIA MOŻE BYĆ ZMNIEJSZONA | Recall the machines that are likely to be affected and check the batch number of the hand brake cylinder. If the batch number appears on the affected list replace the hand brake cylinder. | 2016-06-07 → 2016-07-04 | TI 13_165926 | 439 |
| 2015-10-19 |
KTM - EXC-F
EXC-F
|
PALIWO MOŻE WYCIEKAĆ | Recall the machines that are likely to be affected and replace the M12 aluminium fuel pump nut. Where necessary the seal will also be replaced. | 2015-07-29 → 2015-09-01 | TI/07/15/288/HQ | 165 |
| 2014-11-05 |
KTM - EXC-F
EXC-F
|
PISTON ROD MAY DETACH | Recall the machines that are likely to be affected and remove the fork cap. Check the locking nut for correct torque and tighten if necessary. | 2014-06-16 → 2014-10-10 | TI 01-14-259 | 475 |
| 2014-11-05 |
KTM - EXC
EXC
|
PISTON ROD MAY DETACH | Recall the machines that are likely to be affected and remove the fork cap. Check the locking nut for correct torque and tighten if necessary. | 2014-06-16 → 2014-10-10 | TI 01-14-259 | 475 |
| 2013-04-16 |
KTM - EXC
EXC
|
PRZEPUSTNICA MOŻE NIE POWRÓCIĆ DO BIEGU JAŁOWEGO | W pojazdach, których może to dotyczyć, należy wymienić górną część obudowy ręcznego sterowania przepustnicą, rolkę deflektora i tuleję z brązu. | - → - | TI-02-13-220 | 1468 |
| 2012-11-07 |
KTM - EXC
EXC
|
RYZYKO POŻARU | Wycofaj maszyny, których może to dotyczyć, aby wymienić wstępnie uformowane przewody paliwowe. | - → - | 253 | |
| 2009-04-08 |
KTM - EXC
EXC
|
RURA PRZEDNIEGO WIDELCA MOŻE BYĆ KRUCHA | Wycofaj maszyny, które mogą być dotknięte problemem, aby wymienić obie nogi widelca. | - → - | 54 | |
| 2007-11-12 |
KTM - EXC
EXC
|
PALIWO MOŻE WYCIEKAĆ | Aby rozwiązać ten problem, producent ma wycofać z rynku maszyny, których to dotyczy, w celu zamontowania nowej konstrukcji samoblokującego korka wlewu paliwa. | 2005-08-01 → 2007-04-30 | 2004 |