Tilbagekaldelser MAN

Søgeresultater for tilbagekaldelser

Udgivelsesdato Mærke / Model Problem Foranstaltning Produktionsperiode Fabrikantref. Køretøjer
2007-01-03
MAN Truck and Bus Ltd - TG-A
ELECTRICAL SHORT CIRCUIT MAY OCCUR Recall the vehicles that are likely to be affected to water proof the affected terminals. - → - SI229302 144
2006-11-10
MAN BUS - A49
RISIKO FOR BRAND Recall affected vehicles and replace starter - → - 213900e 26
2006-11-10
MAN BUS - A69
RISIKO FOR BRAND Recall affected vehicles and replace starter - → - 213900e 26
2006-11-10
MAN Truck and Bus Ltd - TG-A
STEERING WHEEL MAY FAIL Recall affected vehicles inspect wheel hub for cracks and if necessary replace. - → - 226106 71
2006-09-06
MAN BUS - STARLINER N516
POSSIBLE FIRE OUTBREAKS IN THE VICINITY OF THE CENTRAL ELECTRICAL PANEL. Recalled vehicles will be checked to ascertain whether Nord lock washers are fitted. If not no action will be taken. If Nord lock washers are fitted they will be removed and replaced with serrated nuts. During each of these procedures the cabling will be checked for smoldering type damage. 2004-01-01 → 2006-08-11 208702 62
2006-09-01
MAN Truck and Bus Ltd - TBUS/COACHES
DRIVER AND CO-DRIVER'S SEATS MAY TIP TO THE REAR Recall all affected vehicles for inspection and replacement of damages seat scissor-type lever assemblies as required. 2004-01-01 → 2006-12-31 188806 2960
2006-09-01
MAN Truck and Bus Ltd - TG-A
DRIVER AND CO-DRIVER'S SEATS MAY TIP TO THE REAR Recall all affected vehicles for inspection and replacement of damages seat scissor-type lever assemblies as required. 2004-01-01 → 2006-12-31 188806 2960
2006-08-10
MAN Truck and Bus Ltd - TGL
BREMSERNE KAN SVIGTE Recalled vehicles will have the subject bolts checked by the appliance of a test torque. - → - 208005 192
2006-08-10
MAN Truck and Bus Ltd - A66
BREMSERNE KAN SVIGTE Recalled vehicles will have the subject bolts checked by the appliance of a test torque. - → - 208005 192
2006-08-10
MAN Truck and Bus Ltd - L2000
BREMSERNE KAN SVIGTE Recalled vehicles will have the subject bolts checked by the appliance of a test torque. - → - 208005 192
2006-06-02
MAN BUS - A51
STYRINGEN KAN SVIGTE Subject vehicles will have the steering shafts checked and replaced as necessary. - → - 185004 78
2006-06-02
MAN Truck and Bus Ltd - F2000
STYRINGEN KAN SVIGTE Subject vehicle will have the steering shafts checked and replaced as necessary. 2004-01-01 → 2006-05-17 185004en 1638
2006-06-02
MAN Truck and Bus Ltd - L2000
STYRINGEN KAN SVIGTE Subject vehicle will have the steering shafts checked and replaced as necessary. 2004-01-01 → 2006-05-17 185004en 1638
2006-06-02
MAN BUS - A66
STYRINGEN KAN SVIGTE Subject vehicles will have the steering shafts checked and replaced as necessary. - → - 185004 78
2006-06-02
MAN Truck and Bus Ltd - TG-A
STYRINGEN KAN SVIGTE Subject vehicle will have the steering shafts checked and replaced as necessary. 2004-01-01 → 2006-05-17 185004en 1638
2006-06-02
MAN Truck and Bus Ltd - TGL
STYRINGEN KAN SVIGTE Subject vehicle will have the steering shafts checked and replaced as necessary. 2004-01-01 → 2006-05-17 185004en 1638
2006-06-02
MAN BUS - A76
STYRINGEN KAN SVIGTE Subject vehicles will have the steering shafts checked and replaced as necessary. - → - 185004 78
2006-03-20
MAN BUS - 14 SERIES
MONTERINGSPLADE PÅ BAGAKSEL KAN BRYDE Tilbagekald de køretøjer, der sandsynligvis er berørt, og udskift den støbte monteringsplade (81.43240-0141) med en modificeret monteringsplade. - → - 169404 34
2005-11-28
MAN BUS - A66
STEERING ARM BOLTS BECOME LOOSE Recall the vehicles that are likely to be affected so that the bolts can be inspected if necessary replaced and correctly torqued. - → - 78
2005-10-31
MAN BUS - L2000
COMPRESSED AIR SYSTEM MAY FAIL Recall the vehicles that are likely to be affected check the model and date of manufacture on the model plate. If affected remove the cartridge and check if the pin heads on the rivets are still firm. If the pin heads are intact rebuild the drier and mark as checked. If the pins have detached find the loose headsremove them and then rebuild the drier with new seal and damping plate. If the pin heads cannot be found a new drier should be fitted. - → - 151305b 4017