| Veröffentlichungsdatum | Marke / Modell | Problem | Maßnahme | Bauzeitraum | Hersteller-Ref. | Fahrzeuge |
|---|---|---|---|---|---|---|
| 2006-03-14 |
BMW MOTORRAD UK - R SERIES
R SERIES
|
ABS KANN VERSAGEN | Rückruf der wahrscheinlich betroffenen Maschinen und Einbau eines Druckbegrenzers in die Hydraulik der Handbremssteuerung. | - → - | 5575 | |
| 2006-03-14 |
BMW MOTORRAD UK - R SERIES
R SERIES
|
ABS KANN VERSAGEN | Bei den zurückgerufenen Maschinen wird das Kabel des ABS-Sensors umverlegt. | - → - | 4582 | |
| 2006-03-14 |
BMW MOTORRAD UK - R SERIES
R SERIES
|
KUPPLUNG KANN AUSFALLEN | Rufen Sie die wahrscheinlich betroffenen Fahrzeuge zurück, um die Kupplungsbaugruppe zu ersetzen. | - → - | 111 | |
| 2005-04-14 |
BMW MOTORRAD UK - R SERIES
R SERIES
|
LECK IM KRAFTSTOFFSYSTEM | Zurückgerufene Maschinen werden auf Kraftstofflecks überprüft und die O-Dichtringe ersetzt. Sollte der Körper der Schnellkupplung undicht sein, wird auch dieser ersetzt. | - → - | 0000162900 | 8673 |
| 2005-03-18 |
BMW MOTORRAD UK - R SERIES
R SERIES
|
GASZUG KANN SICH VERKLEMMEN | Rufen Sie die wahrscheinlich betroffenen Maschinen zurück und bringen Sie Abdeckungen für die Gaszugrollen an. | - → - | 0000131000 | 477 |
| 2005-02-04 |
BMW MOTORRAD UK - R SERIES
R SERIES
|
MOTOR KANN AUSFALLEN | Rufen Sie die wahrscheinlich betroffenen Maschinen zurück und bauen Sie gegebenenfalls eine neue O-Ring-Dichtung unter dem Gehäuse der Kraftstoffpumpe ein. Gegebenenfalls ist zusätzlich die Kraftstoffpumpeneinheit zu ersetzen. | - → - | 668 | |
| 2003-07-01 |
BMW MOTORRAD UK - R SERIES
R SERIES
|
DIE HINTEREN BREMSEN KÖNNEN VERSAGEN | Rufen Sie alle wahrscheinlich betroffenen Maschinen zurück und bauen Sie einen geänderten hinteren Bremsschlauch ein. Zusätzlich sind die Anschlüsse am Bremssattel und der 180-Grad-Adapter korrekt zu montieren, sofern erforderlich. | - → - | 0000345700 | 547 |
| 2002-11-25 |
BMW MOTORRAD UK - R SERIES
R SERIES
|
GEARBOX MAY LOCK UP | Replace the gearbox on the affected motorcycles. | 2002-09-01 → 2002-10-31 | 0000231800 | 149 |
| 1997-12-01 |
BMW MOTORRAD UK - R SERIES
R SERIES
|
TOTAL ELECTRICAL FAILURE | Affected machines are being recalled for alterations to the steering lock wiring loom routing and securing arrangements. | - → 1996-12-31 | 548 | |
| 1994-08-18 |
BMW MOTORRAD UK - R SERIES
R SERIES
|
FRONT SUSPENSION LINKAGE/POSSIBLE HANDLEBAR CRACKING | A. Replace the telelever joint nut with an improved version incorporating a self locking adhesive. B. On affected R1100RS SE machines replace the original handlebars with an improved version. | 1993-01-01 → 1994-12-31 | 850 | |
| 1994-06-27 |
BMW MOTORRAD UK - R SERIES
R SERIES
|
POSSIBLE LOOSENING OF SUSPENSION PIVOTS | Recall the affected machines and: A) Remove clean examine and re-fit the swinging arm bearing pin having applied locking compound to the threads as directed by the manufacturer. B) Replace the flange nut on the front suspension strut retaining bolt wit | 1994-01-01 → 1994-05-31 | 191 | |
| 1993-08-03 |
BMW MOTORRAD UK - R SERIES
R SERIES
|
POSSIBLE SHORT CIRCUIT | Recall the affected machines for removal of the subject bracket and the fitting of a cable direct to the battery positive terminal. | 1993-02-01 → 1993-06-30 | 302 | |
| 1992-10-28 |
BMW MOTORRAD UK - R SERIES
R SERIES
|
BRAKE CALIPER BRIDGING PIPE MAY CONTACT THE FRONT WHEEL | Recall the affected machines for replacement of the original connecting pipe by a redesigned version routed to eliminate the possibility of wheel contact. | 1991-11-01 → 1992-03-31 | 271 | |
| 1992-10-28 |
BMW MOTORRAD UK - R SERIES
R SERIES
|
BRAKE CALIPER BRIDGING PIPE MAY CONTACT THE FRONT WHEEL | Recall the affected machines for replacement of the original connecting pipe by a redesigned version routed to eliminate the possibility of wheel contact. | 1999-11-01 → 1992-03-31 | 271 |