| Veröffentlichungsdatum | Marke / Modell | Problem | Maßnahme | Bauzeitraum | Hersteller-Ref. | Fahrzeuge |
|---|---|---|---|---|---|---|
| 2004-10-04 |
HONDA MOTOR CO - ACCORD
ACCORD
|
INSTRUMENT PANEL LIGHTS MAY FAIL | Affected vehicles will be recalled and the affected part replaced. | 1998-07-01 → 1999-07-01 | 2737 | |
| 2004-08-16 |
HONDA MOTORCYCLES - CBR600RR-4
CBR600RR-4
|
REAR BRAKE MASTER CYLINDER CONNECTING ROD END MAY FRACTURE | Recall affected machines and replace connecting rod with one made of steel instead of aluminium. | 2003-10-09 → 2004-07-12 | 4197 | |
| 2004-08-16 |
HONDA MOTORCYCLES - CBR600RR-3
CBR600RR-3
|
REAR BRAKE MASTER CYLINDER CONNECTING ROD END MAY FRACTURE | Recall affected machines and replace connecting rod with one made of steel instead of aluminium. | 2003-02-17 → 2003-07-23 | 4197 | |
| 2004-07-02 |
HONDA MOTORCYCLES - FJS600A-3
FJS600A-3
|
BESORGNIS, DASS DIE STANZUNG DES KRAFTSTOFFTANKS NICHT DEN FERTIGUNGSSpezifikationen ENTSPRICHT | Rückruf betroffener Maschinen: Überprüfen Sie den Kraftstofftank, um festzustellen, ob er ausgetauscht werden muss. Wenn bei der Überprüfung ein Problem festgestellt wird, wird ein Kraftstofftank mit Gegenmaßnahme eingebaut. | 2003-05-01 → 2003-05-01 | 93 | |
| 2004-07-02 |
HONDA MOTORCYCLES - FJS600D-3
FJS600D-3
|
BESORGNIS, DASS DIE STANZUNG DES KRAFTSTOFFTANKS NICHT DEN FERTIGUNGSSpezifikationen ENTSPRICHT | Rückruf betroffener Maschinen: Überprüfen Sie den Kraftstofftank, um festzustellen, ob er ausgetauscht werden muss. Wenn bei der Überprüfung ein Problem festgestellt wird, wird ein Kraftstofftank mit Gegenmaßnahme eingebaut. | 2003-05-01 → 2003-05-01 | 93 | |
| 2004-06-14 |
HONDA MOTORCYCLES - CBR1000RR-4
CBR1000RR-4
|
POSSIBILITY THE SPEEDOMETER WILL SHOW A SLOWER SPEED THAN ACTUAL RIDING SPEED | Recalled machines will be fitted with a countermeasure speedometer. | 2004-05-01 → 2004-05-01 | DH/SB1805 | 1408 |
| 2004-05-24 |
HONDA MOTOR CO - INSIGHT
INSIGHT
|
LOW BEAM HEADLIGHTS MAY NOT OPERATE. | Recall likely to be affected vehicles and replace the headlight switch with a modified part. Additionally the terminal for dipped beam operation within the wiring harness will also be changed in order to rectify any heat damage that may have occurred. | 1999-10-05 → 2000-08-30 | 44055 | |
| 2004-05-24 |
HONDA MOTOR CO - JAZZ
JAZZ
|
LOW BEAM HEADLIGHTS MAY NOT OPERATE. | Recall likely to be affected vehicles and replace the headlight switch with a modified part. Additionally the terminal for dipped beam operation within the wiring harness will also be changed in order to rectify any heat damage that may have occurred. | 2001-07-06 → 2001-09-21 | 44055 | |
| 2004-05-24 |
HONDA MOTOR CO - STREAM
STREAM
|
LOW BEAM HEADLIGHTS MAY NOT OPERATE. | Recall likely to be affected vehicles and replace the headlight switch with a modified part. Additionally the terminal for dipped beam operation within the wiring harness will also be changed in order to rectify any heat damage that may have occurred. | 2000-06-28 → 2001-10-01 | 44055 | |
| 2004-05-24 |
HONDA MOTOR CO - LOGO
LOGO
|
LOW BEAM HEADLIGHTS MAY NOT OPERATE. | Recall likely to be affected vehicles and replace the headlight switch with a modified part. Additionally the terminal for dipped beam operation within the wiring harness will also be changed in order to rectify any heat damage that may have occurred. | 1999-10-22 → 2000-02-23 | 44055 | |
| 2004-05-24 |
HONDA MOTOR CO - CIVIC
CIVIC
|
LOW BEAM HEADLIGHTS MAY NOT OPERATE. | Recall likely to be affected vehicles and replace the headlight switch with a modified part. Additionally the terminal for dipped beam operation within the wiring harness will also be changed in order to rectify any heat damage that may have occurred. | 2001-06-08 → 2001-12-20 | 44055 | |
| 2004-05-24 |
HONDA MOTOR CO - LOGO
LOGO
|
LOW BEAM HEADLIGHTS MAY NOT OPERATE. | Recall likely to be affected vehicles and replace the headlight switch with a modified part. Additionally the terminal for dipped beam operation within the wiring harness will also be changed in order to rectify any heat damage that may have occurred. | 1999-10-05 → 2000-08-30 | 44055 | |
| 2004-03-02 |
HONDA MOTORCYCLES - NT650
NT650
|
REAR BRAKE PEDAL WELD CONCERN | Recall potentially affected machines and fit a new rear brake pedal. | 2003-03-17 → 2003-11-07 | DH/BA/AS04004 | 697 |
| 2004-02-02 |
HONDA MOTORCYCLES - FJS600A-3
FJS600A-3
|
MÖGLICHE BRUCHGEFAHR DER UNTEREN HALTERUNGSSCHRAUBEN DES LENKERS. | Gegenmaßnahmen wurden entwickelt und werden an allen betroffenen Maschinen angebracht. | - → - | DH/BA/AS03015 | 905 |
| 2004-02-02 |
HONDA MOTORCYCLES - FJS600D-3
FJS600D-3
|
MÖGLICHE BRUCHGEFAHR DER UNTEREN HALTERUNGSSCHRAUBEN DES LENKERS. | Gegenmaßnahmen wurden entwickelt und werden an allen betroffenen Maschinen angebracht. | - → - | DH/BA/AS03015 | 905 |
| 2004-02-02 |
HONDA MOTORCYCLES - FJS600-1
FJS600-1
|
MÖGLICHE BRUCHGEFAHR DER UNTEREN HALTERUNGSSCHRAUBEN DES LENKERS. | Gegenmaßnahmen wurden entwickelt und werden an allen betroffenen Maschinen angebracht. | - → - | DH/BA/AS03015 | 905 |
| 2004-02-02 |
HONDA MOTORCYCLES - FJS600-2
FJS600-2
|
MÖGLICHE BRUCHGEFAHR DER UNTEREN HALTERUNGSSCHRAUBEN DES LENKERS. | Gegenmaßnahmen wurden entwickelt und werden an allen betroffenen Maschinen angebracht. | - → - | DH/BA/AS03015 | 905 |
| 2003-10-31 |
HONDA MOTORCYCLES - GL1800A-3
GL1800A-3
|
IMPROPER WELDS IN FRAME CROSS MEMBER | Recall affected machines for inspection. Any repairs will consist of reinforcement of the welds and where cracks are identified during the initial inspection a new countermeasure frame will be installed. | 2002-03-01 → 2002-09-10 | DH/MK/AS03012 | 120 |
| 2003-10-31 |
HONDA MOTORCYCLES - GL1800A-2
GL1800A-2
|
IMPROPER WELDS IN FRAME CROSS MEMBER | Recall affected machines for inspection. Any repairs will consist of reinforcement of the welds and where cracks are identified during the initial inspection a new countermeasure frame will be installed. | 2002-03-01 → 2002-09-10 | DH/MK/AS03012 | 120 |
| 2003-08-18 |
HONDA MOTORCYCLES - CB1300F-3
CB1300F-3
|
BESCHÄDIGUNG DES KABELBAUMS | Alle potenziell betroffenen Maschinen werden einer Inspektion und Reparatur unterzogen, um die Grate zu entfernen. An der betroffenen Stelle des Hauptkabelbaums werden Schutzschläuche angebracht, und der Kabelbaum wird erneuert, wenn er beschädigt ist. | - → - | DH/MK/AS03010 | 570 |