| Veröffentlichungsdatum | Marke / Modell | Problem | Maßnahme | Bauzeitraum | Hersteller-Ref. | Fahrzeuge |
|---|---|---|---|---|---|---|
| 2025-07-07 |
KAWASAKI - ZX636J
ZX636J
|
DAM 08 Retightening the Crankcase Fastening Bolts | Check crankshaft main bearing and retighten the crankcase fastening bolts. | 2023-07-31 → 2025-05-28 | DAM08 | 594 |
| 2024-04-02 |
KAWASAKI - ZX400R
ZX400R
|
Spark Plug Replacement | To overcome this problem Kawasaki will replace the spark plugs. | 2023-07-15 → 2023-11-07 | DAL50 | 100 |
| 2024-04-02 |
KAWASAKI - ZX400P
ZX400P
|
Spark Plug Replacement | To overcome this problem Kawasaki will replace the spark plugs. | 2023-07-13 → 2023-10-28 | DAL50 | 149 |
| 2022-12-13 |
KAWASAKI - ZX1000
ZX1000
|
The plunger in the camshaft-chain tensioner can lock up during usage due to deterioration of internal parts | Replace the camshaft chain tensioner with a revised part. | 2016-01-01 → 2022-12-31 | DAK73 | 2290 |
| 2022-12-13 |
KAWASAKI - ZX1002
ZX1002
|
The plunger in the camshaft-chain tensioner can lock up during usage due to deterioration of internal parts | Replace the camshaft chain tensioner with a revised part. | 2017-01-01 → 2022-12-31 | DAK73 | 2290 |
| 2021-08-06 |
KAWASAKI - ZX1002B
ZX1002B
|
THE AMOUNT OF GREASE APPLIED TO THE NEEDLE BEARINGS IN THE REAR HUB HOUSING MAY BE INSUFFICIENT | Replace the rear hub housing needle bearing on all eligible units. | 2017-12-01 → 2020-04-09 | DAK52 | 1042 |
| 2021-08-06 |
KAWASAKI - ZX1002B/D
ZX1002B/D
|
THE OIL PRESSURE RELIEF VALVE MAY FAIL | Replace the oil pressure relief valve. | 2020-12-02 → 2021-04-27 | DAK48 | 209 |
| 2021-08-06 |
KAWASAKI - ZX1002L/N
ZX1002L/N
|
THE OIL PRESSURE RELIEF VALVE MAY FAIL | Replace the oil pressure relief valve. | 2020-12-02 → 2021-04-27 | DAK48 | 209 |
| 2021-08-06 |
KAWASAKI - ZX1000Y
ZX1000Y
|
THE OIL PRESSURE RELIEF VALVE MAY FAIL | Replace the oil pressure relief valve. | 2020-12-02 → 2021-04-27 | DAK48 | 209 |
| 2021-08-06 |
KAWASAKI - ZX1002J
ZX1002J
|
THE OIL PRESSURE RELIEF VALVE MAY FAIL | Replace the oil pressure relief valve. | 2020-12-02 → 2021-04-27 | DAK48 | 209 |
| 2021-08-06 |
KAWASAKI - ZX1002D
ZX1002D
|
THE AMOUNT OF GREASE APPLIED TO THE NEEDLE BEARINGS IN THE REAR HUB HOUSING MAY BE INSUFFICIENT | Replace the rear hub housing needle bearing on all eligible units. | 2017-12-01 → 2020-04-09 | DAK52 | 1042 |
| 2021-08-06 |
KAWASAKI - ZX1002A
ZX1002A
|
THE AMOUNT OF GREASE APPLIED TO THE NEEDLE BEARINGS IN THE REAR HUB HOUSING MAY BE INSUFFICIENT | Replace the rear hub housing needle bearing on all eligible units. | 2017-12-01 → 2020-04-09 | DAK52 | 1042 |
| 2020-06-05 |
KAWASAKI - ZX1002H
ZX1002H
|
THE FACTORY ECU PROGRAMMING MAY CAUSE THE ENGINE TO AFTER FIRE WHEN KAWASAKI QUICK SHIFTER IS USED UNDER HEAVY ENGINE LOAD | Reprogram the ECU. Replace the reed valves in the air suction valve assemblies on used motorcycles and if necessary replace any parts that have been heat damaged as a result of after-fire occurring. | 2018-10-02 → 2019-06-27 | 238 | |
| 2020-06-05 |
KAWASAKI - ZX1002G
ZX1002G
|
THE FACTORY ECU PROGRAMMING MAY CAUSE THE ENGINE TO AFTER FIRE WHEN KAWASAKI QUICK SHIFTER IS USED UNDER HEAVY ENGINE LOAD | Reprogram the ECU. Replace the reed valves in the air suction valve assemblies on used motorcycles and if necessary replace any parts that have been heat damaged as a result of after-fire occurring. | 2018-10-02 → 2019-06-27 | 238 | |
| 2020-06-05 |
KAWASAKI - ZX1002E
ZX1002E
|
THE FACTORY ECU PROGRAMMING MAY CAUSE THE ENGINE TO AFTER FIRE WHEN KAWASAKI QUICK SHIFTER IS USED UNDER HEAVY ENGINE LOAD | Reprogram the ECU. Replace the reed valves in the air suction valve assemblies on used motorcycles and if necessary replace any parts that have been heat damaged as a result of after-fire occurring. | 2018-10-02 → 2019-06-27 | 238 | |
| 2018-02-09 |
KAWASAKI - ZX1000S
ZX1000S
|
TRANSMISSION MAY FAIL | On affected machines replace the 2nd 3rd and 4th output gears and the 2nd input gear | - → - | DAH31 | 1064 |
| 2018-02-09 |
KAWASAKI - ZX1000Z
ZX1000Z
|
TRANSMISSION MAY FAIL | On affected machines replace the 2nd 3rd and 4th output gears and the 2nd input gear | - → - | DAH31 | 1064 |
| 2016-02-29 |
KAWASAKI - ZX-10
ZX-10
|
LENKUNG KANN AUSFALLEN | Recall the machines that are likely to be affected and replace both bolts with new ones. | - → - | DAG41 | 310 |
| 2012-08-14 |
KAWASAKI - ZX1000
ZX1000
|
ÖL KANN AUSLAUFEN | The repair consists of adding a special sealing compound to the affected area to avoid any possibility of oil leakage. | - → - | DAE13 | 816 |
| 2012-03-02 |
KAWASAKI - ZX-6
ZX-6
|
MOTOR KANN ABGEWÜRGT WERDEN | Recall the machines which are likely to be affected to replace the regulator. | - → - | DAA921A | 3656 |