| Launch date | Make / Model | Concern | Remedy | Build range | Manufacturer ref | Vehicles |
|---|---|---|---|---|---|---|
| 2018-12-20 |
BMW MOTORRAD UK - F800GSA
F800GSA
|
THE MALFUNCTION INDICATOR LIGHT IS NOT ACTIVATED PROPERLY IN THE EVENT OF A FAULT | Install a software upgrade to the malfunction indicator system. | 2015-10-14 → 2016-09-16 | 00 00 62 04 00 | 12 |
| 2009-05-21 |
BMW MOTORRAD UK - F SERIES
F SERIES
|
QUICK- RELEASE AXLES MAY BE DEFECTIVE | Recall the machines that are likely to be affected to replace the front quick release axle. | - → - | 482 | |
| 2008-07-31 |
BMW MOTORRAD UK - F800GS (K72)
F800GS (K72)
|
FRONT BRAKE CALIPER MAY BECOME INSECURE | Recalled machines will have the front brake caliper fasteners checked and reworked as necessary. | - → - | 248 | |
| 2008-06-12 |
BMW MOTORRAD UK - F800S
F800S
|
STEERING DAMPER MAY BECOME DEFECTIVE. | Recalled machines will have the steering damper replaced. | - → - | 326 | |
| 2008-06-12 |
BMW MOTORRAD UK - F800ST
F800ST
|
STEERING DAMPER MAY BECOME DEFECTIVE. | Recalled machines will have the steering damper replaced. | - → - | 326 | |
| 2008-03-03 |
BMW MOTORRAD UK - F SERIES
F SERIES
|
FUEL PRESSURE SENSORS MAY BE DEFECTIVE | Recall the vehicles that are likely to be affected to check the fuel pressure sensor and where necessary replace the sensor with a quality assured sensor. | - → - | 162 | |
| 2008-02-21 |
BMW MOTORRAD UK - F SERIES
F SERIES
|
FUEL MAY LEAK | Recall the machines that are likely to be affected to re-route the fuel tank breather pipe. | - → - | 0000163500 | 1253 |
| 2007-02-16 |
BMW MOTORRAD UK - F SERIES
F SERIES
|
SIDE STAND MAY DETACH | Recall the machines that are likely to be affected to replace the frame bottom section. | - → - | 0000462700 | 48 |
| 2005-03-02 |
BMW MOTORRAD UK - F SERIES
F SERIES
|
FUEL MAY LEAK FROM FUEL PUMP MOUNTING FLANGE | Recall likely to be affected machines and fit the fuel pump mounting flange with a protective rubber cap. | - → - | 0000163200 | 742 |
| 2003-11-28 |
BMW MOTORRAD UK - F SERIES
F SERIES
|
REAR BRAKE CALIPER RETAINING SCREWS MAY NOT BE TO THE CORRECT TORQUE | Recall affected machines and check the tightening torque of the caliper retaining screws. | - → - | 727 |