| Launch date | Make / Model | Concern | Remedy | Build range | Manufacturer ref | Vehicles |
|---|---|---|---|---|---|---|
| 2024-12-11 |
BMW MOTORRAD UK - S1000RR
S1000RR
|
CHECK OIL FILTER REPLACE IF NECESSARY | Vehicles will have the oil filter checked and replaced if affected. | 2009-08-31 → 2024-10-17 | 0000112900 | 53 |
| 2023-03-31 |
BMW MOTORRAD UK - S1000RR
S1000RR
|
A dimensionally incorrect fulcrum pin of that handbrake lever can cause a reduced blowby clearance. | The fulcrum pin of the milled handbrake lever will be replaced against a dimensionally correct fulcrum pin. | 2022-09-13 → 2023-02-09 | 0000321200 | 158 |
| 2022-10-31 |
BMW MOTORRAD UK - S1000RR
S1000RR
|
THE CLUTCH COVER SCREWS MAY LOOSEN | On affected vehicles the screw for attaching the clutch cover will be replaced. | 2020-11-05 → 2022-09-30 | 0000611700 | 690 |
| 2019-10-20 |
BMW MOTORRAD UK - S1000RR
S1000RR
|
CRACKS MAY APPEAR WHERE THE OIL HOSE OF THE OIL COOLER CONNECTS WITH THE OIL PIPE | On affected bikes the oil cooler will be replaced. | 2018-09-05 → 2019-08-27 | 0000170600 | 190 |
| 2013-01-31 |
BMW MOTORRAD UK - S1000RR
S1000RR
|
SIDE STAND MAY FAIL | Recall the machines that are likely to be affected and replace the original threaded fasteners with ones that are longer and have Pre-coating applied to all the thread. | - → - | 0000463000 | 752 |
| 2012-06-11 |
BMW MOTORRAD UK - S1000RR
S1000RR
|
ENGINE MAY SEIZE | Recall the machines that are likely to be affected to install new conrod bolts that have thread locking compound applied. | 2011-10-04 → 2012-04-10 | 0000112000 | 470 |