| Fecha de lanzamiento | Marca / Modelo | Problema | Acción correctiva | Periodo de producción | Ref. del fabricante | Vehículos |
|---|---|---|---|---|---|---|
| 2013-10-21 |
BENTLEY MOTORS LIMITED - CONTINENTAL GT
CONTINENTAL GT
|
POSSIBLE LOSS OF REAR BRAKE | Recall the vehicles that are likely to be affected to replace the affected stainless steel screws with a screw of a different material that is not susceptible to stress corrosion cracking. | 2006-07-01 → 2010-06-01 | R790 2030329/1 | 343 |
| 2013-10-21 |
BENTLEY MOTORS LIMITED - CONTINENTAL GTC
CONTINENTAL GTC
|
POSSIBLE LOSS OF REAR BRAKE | Recall the vehicles that are likely to be affected to replace the affected stainless steel screws with a screw of a different material that is not susceptible to stress corrosion cracking. | 2006-07-01 → 2010-06-30 | R790 2030329/1 | 343 |
| 2013-10-21 |
BENTLEY MOTORS LIMITED - CONTINENTAL FLYING SPUR
CONTINENTAL FLYING SPUR
|
POSSIBLE LOSS OF REAR BRAKE | Recall the vehicles that are likely to be affected to replace the affected stainless steel screws with a screw of a different material that is not susceptible to stress corrosion cracking. | 2006-07-01 → 2010-06-01 | R790 2030329/1 | 343 |
| 2006-08-22 |
BENTLEY MOTORS LIMITED - CONTINENTAL GT
CONTINENTAL GT
|
PÉRDIDA POTENCIAL DE EFICACIA DE FRENADO | Se inspeccionarán los vehículos retirados y se comprobará la holgura entre el tubo de freno y la pinza del latiguillo. Si la holgura se ajusta a la tolerancia y no hay daños, no será necesario tomar ninguna otra medida. En caso de que la holgura sea inferior a la norma requerida, se tomarán las medidas correctoras oportunas. | - → - | AGS EJD | 536 |
| 1997-03-21 |
BENTLEY MOTORS LIMITED - CONTINENTAL
CONTINENTAL
|
POSIBLE ENSUCIAMIENTO DE LOS TUBOS DE FRENO | Los vehículos afectados están siendo llamados a revisión para inspeccionar los tubos hidráulicos afectados. Si se comprueba que la holgura de los tubos es insuficiente, se ajustará de acuerdo con las especificaciones del fabricante. | - → - | 35 |