| Fecha de lanzamiento | Marca / Modelo | Problema | Acción correctiva | Periodo de producción | Ref. del fabricante | Vehículos |
|---|---|---|---|---|---|---|
| 2024-11-04 |
TOYOTA (GB) PLC - HIGHLANDER
HIGHLANDER
|
2nd Row Rear Seat Back Frame On Certain Toyota Highlander | Installation of a protective cover on the second-row rear 40% split seat back frame mid-bar end. | 2019-12-06 → 2024-01-12 | ZGGA0 (24SD_129) | 1491 |
| 2023-11-27 |
TOYOTA (GB) PLC - HIGHLANDER
HIGHLANDER
|
On affected vehicles minor impact to the lower front bumper cover could break the mounting tabs resulting in the lower bumper cover the engine under cover and the front wheel arch liners detaching from the vehicle while driving. | Inspect the mounting tabs of the upper front bumper cover for damage if no damage is found modified retention hardware will be fitted. If damage is found the upper and lower front bumper cover will be replaced and modified retention hardware fitted.� | 2019-12-06 → 2023-08-29 | YGG74 (23SD-116) | 1492 |
| 2023-10-12 |
TOYOTA (GB) PLC - HIGHLANDER
HIGHLANDER
|
En los vehículos afectados existe la posibilidad de que el DCM no complete el proceso de apagado en un periodo de tiempo específico cuando se apaga el encendido, lo que provoca que el DCM no se reinicie en el siguiente ciclo de encendido y que la función e-Call no esté disponible. Como resultado, los vehículos no cumplen la normativa pertinente. | El software del DCM (módulo de comunicación de datos) se actualizará mediante una actualización inalámbrica Over the Air (OTA). | 2023-02-02 → 2023-04-24 | YGG63 (23SD-101) | 27327 |
| 2022-06-20 |
TOYOTA (GB) PLC - HIGHLANDER
HIGHLANDER
|
SPECIFIC POINTS ON THE FRONT SEAT BACK FRAMES WERE NOT MANUFACTURED WITH THE MINIMUM RADIUS CRITERIA AND DO NOT COMPLY WITH ECE UNR17 | Modify the seat back frame | 2020-11-02 → 2021-06-10 | XGG05-22SMD-053 | 656 |
| 2021-11-15 |
TOYOTA (GB) PLC - HIGHLANDER
HIGHLANDER
|
EL SISTEMA DE LLAMADA DE EMERGENCIA (eCall) PUEDE NO FUNCIONAR CUANDO SE REQUIERE | Inspeccione el sistema de llamada de emergencia y actualice el software del DCM. Si se detecta que el DCM está dañado, sustitúyalo por un software actualizado. | 2020-11-04 → 2021-04-06 | WGG58 | 26575 |
| 2015-12-01 |
TOYOTA (GB) PLC - HIGHLANDER
HIGHLANDER
|
RIESGO DE INCENDIO | Inspeccione el interruptor y aplique el recubrimiento. Si el interruptor presenta signos de mal funcionamiento, debe sustituirse. | 2005-06-13 → 2010-12-31 | TBA | 123306 |