| Data de lançamento | Marca / Modelo | Problema | Ação corretiva | Período de produção | Ref. do fabricante | Veículos |
|---|---|---|---|---|---|---|
| 2013-10-21 |
BENTLEY MOTORS LIMITED - CONTINENTAL GT
CONTINENTAL GT
|
POSSIBLE LOSS OF REAR BRAKE | Recall the vehicles that are likely to be affected to replace the affected stainless steel screws with a screw of a different material that is not susceptible to stress corrosion cracking. | 2006-07-01 → 2010-06-01 | R790 2030329/1 | 343 |
| 2013-10-21 |
BENTLEY MOTORS LIMITED - CONTINENTAL GTC
CONTINENTAL GTC
|
POSSIBLE LOSS OF REAR BRAKE | Recall the vehicles that are likely to be affected to replace the affected stainless steel screws with a screw of a different material that is not susceptible to stress corrosion cracking. | 2006-07-01 → 2010-06-30 | R790 2030329/1 | 343 |
| 2013-10-21 |
BENTLEY MOTORS LIMITED - CONTINENTAL FLYING SPUR
CONTINENTAL FLYING SPUR
|
POSSIBLE LOSS OF REAR BRAKE | Recall the vehicles that are likely to be affected to replace the affected stainless steel screws with a screw of a different material that is not susceptible to stress corrosion cracking. | 2006-07-01 → 2010-06-01 | R790 2030329/1 | 343 |
| 2006-08-22 |
BENTLEY MOTORS LIMITED - CONTINENTAL GT
CONTINENTAL GT
|
POTENTIAL LOSS OF BRAKING EFFICIENCY | Recalled vehicles will be inspected and the clearance between the brake pipe and hose clip checked. If the clearance is to tolerance and no damage exists no further action will be required. Should the clearance be below the required standard remedial action will be taken as appropriate. | - → - | AGS EJD | 536 |
| 1997-03-21 |
BENTLEY MOTORS LIMITED - CONTINENTAL
CONTINENTAL
|
POSSIBLE FOULING OF BRAKE PIPES | The affected vehicles are being recalled for inspection of the hydraulic pipes concerned. Where pipe clearance is found to be insufficient this will be adjusted to accord with the manufacturers specification. | - → - | 35 |