| Data de lançamento | Marca / Modelo | Problema | Ação corretiva | Período de produção | Ref. do fabricante | Veículos |
|---|---|---|---|---|---|---|
| 2018-02-09 |
KAWASAKI - ZX1000S
ZX1000S
|
A TRANSMISSÃO PODE FALHAR | On affected machines replace the 2nd 3rd and 4th output gears and the 2nd input gear | - → - | DAH31 | 1064 |
| 2018-02-09 |
KAWASAKI - ZX1000Z
ZX1000Z
|
A TRANSMISSÃO PODE FALHAR | On affected machines replace the 2nd 3rd and 4th output gears and the 2nd input gear | - → - | DAH31 | 1064 |
| 2016-02-29 |
KAWASAKI - ZX-10
ZX-10
|
A DIRECÇÃO PODE FALHAR | Recall the machines that are likely to be affected and replace both bolts with new ones. | - → - | DAG41 | 310 |
| 2012-08-14 |
KAWASAKI - ZX1000
ZX1000
|
PODE HAVER FUGA DE ÓLEO | The repair consists of adding a special sealing compound to the affected area to avoid any possibility of oil leakage. | - → - | DAE13 | 816 |
| 2012-03-02 |
KAWASAKI - ZX-6
ZX-6
|
O MOTOR PODE PARAR | Recall the machines which are likely to be affected to replace the regulator. | - → - | DAA921A | 3656 |
| 2012-03-02 |
KAWASAKI - ZX-10
ZX-10
|
O MOTOR PODE PARAR | Recall the machines which are likely to be affected to replace the regulator. | - → - | DAA921A | 3656 |
| 2011-08-02 |
KAWASAKI - ZX-10
ZX-10
|
O MOTOR PODE FALHAR | Recall vehicles to inspect and re-route harness if harness damaged this will be repaired or replaced. | - → - | DAD60 | 628 |
| 2008-06-13 |
KAWASAKI - ZX1400B6F
ZX1400B6F
|
SEPARATION OF THE FRAME CROSS PIPE. | Recall the machines that are likely to be affected to check the torque of the engine mounting collars and where necessary retorque them. If the mountings have been over tightened the engine mounting frame will have to be removed for inspection and replaced where necessary. | - → - | 1239 | |
| 2008-06-13 |
KAWASAKI - ZX1400B7F
ZX1400B7F
|
SEPARATION OF THE FRAME CROSS PIPE. | Recall the machines that are likely to be affected to check the torque of the engine mounting collars and where necessary retorque them. If the mountings have been over tightened the engine mounting frame will have to be removed for inspection and replaced where necessary. | - → - | 1239 | |
| 2008-06-13 |
KAWASAKI - ZX1400A7F
ZX1400A7F
|
SEPARATION OF THE FRAME CROSS PIPE. | Recall the machines that are likely to be affected to check the torque of the engine mounting collars and where necessary retorque them. If the mountings have been over tightened the engine mounting frame will have to be removed for inspection and replaced where necessary. | - → - | 1239 | |
| 2008-06-13 |
KAWASAKI - ZX1400A6F
ZX1400A6F
|
SEPARATION OF THE FRAME CROSS PIPE. | Recall the machines that are likely to be affected to check the torque of the engine mounting collars and where necessary retorque them. If the mountings have been over tightened the engine mounting frame will have to be removed for inspection and replaced where necessary. | - → - | 1239 | |
| 2006-10-11 |
KAWASAKI - ZX600E6F
ZX600E6F
|
O MOTOR PODE FALHAR | Recall the vehicles that are likely to be affected to check the cylinder head Lot number and check the depth of the spark plug. Where the depth of the spark plug is incorrect it will be necessary to replace the cylinder head. | - → - | 190 | |
| 2006-05-30 |
KAWASAKI - ZX1400A6F
ZX1400A6F
|
O MOTOR PODE PARAR | Recall the vehicles that are likely to be affected and tighten the down sensor mounting bolts to the specified torque. | - → - | 258 | |
| 2006-05-02 |
KAWASAKI - ZX1000
ZX1000
|
STEERING DAMPER BOLT MAY BECOME DETACHED | Recall the vehicles that are likely to be affected to tighten the steering damper bolt to the correct torque and to check the play between the steering damper and bracket. | - → - | 1116 | |
| 2004-08-03 |
KAWASAKI - ZX1000-C1H
ZX1000-C1H
|
FRONT WHEEL MAY CONTAIN CASTING FLAWS. | Recall affected machines and replace front wheel. | - → - | 1192 | |
| 2003-10-27 |
KAWASAKI - ZX600F1
ZX600F1
|
MUFFLER MAY BECOME DETACHED | Recall affected machines to check the bracket welds and to add a damper or if necessary replacing the muffler. | - → - | 31 | 2628 |
| 2003-01-06 |
KAWASAKI - ZX1200A1
ZX1200A1
|
POSSIBLE OIL LEAK | Seal the electrical harness connected to the stator. | - → - | 25 | 2401 |
| 2001-10-24 |
KAWASAKI - ZX1200A1
ZX1200A1
|
POSSIBLE LOSS OF TYRE PRESSURE FROM FRONT AND REAR TYRES | Fit replacement tyre valve nuts of increased size and improved material. Replace washer beneath the valve nut with one of improved material. | - → - | 21 | 1871 |
| 2001-10-24 |
KAWASAKI - ZX1200A2
ZX1200A2
|
POSSIBLE LOSS OF TYRE PRESSURE FROM FRONT AND REAR TYRES | Fit replacement tyre valve nuts of increased size and improved material. Replace washer beneath the valve nut with one of improved material. | - → - | 21 | 1871 |
| 2000-12-06 |
KAWASAKI - ZX1200A1
ZX1200A1
|
POSSÍVEL FUGA DE COMBUSTÍVEL | Recall affected machines and replace the fuel tank if the pipe is found to be cracked. Where the pipe is found to be serviceable a damper weight will be fitted to eliminate the vibration which may cause the pipe to crack. At the same time a new fuel level sensor will be fitted to address reports of inaccurate reading of the fuel gauge. | - → - | 15 | 1843 |