| Дата кампанії | Марка / Модель | Проблема | Заходи | Період виробництва | Реф. виробника | Кількість ТЗ |
|---|---|---|---|---|---|---|
| 2024-08-05 |
LEXUS - LEXUS NX
LEXUS NX
|
LSS & TSS 3.0 Forward Recognition Camera on Multiple Models | Reprogram the Forward Recognition Camera | 2021-04-15 → 2023-03-06 | ZGG47 (24SD-055) | 4841 |
| 2023-10-12 |
LEXUS - LEXUS NX
LEXUS NX
|
Due to the software programming for the DCM memory capacity there is a possibility that the DCM may not complete the shutdown process within a specific period of time when the ignition is turned off causing the DCM to not restart at the next ignition cycle and making the e-Call function unavailable. | Програмне забезпечення DCM (Модуль передачі даних) буде оновлюватися через бездротове оновлення по повітрю (OTA). | 2021-12-01 → 2023-07-06 | YGG63 (23SD-101) | 4261 |
| 2023-08-21 |
LEXUS - LEXUS NX450h+
LEXUS NX450h+
|
DC-DC converter may have been damaged during production | Replace the DC-DC Converter. | 2021-11-16 → 2022-06-03 | YGG27 (23SD-075) | 891 |
| 2022-05-09 |
LEXUS - LEXUS NX
LEXUS NX
|
CERTAIN SPOT WELDS MIGHT BE MISSING. | Inspect the welding near the shock absorber mounting area. If any missing spot-weld is found welds will be added and damage to the vehicle if any will be repaired. | 2021-04-15 → 2022-01-27 | NX | 759 |
| 2010-05-26 |
LEXUS - LEXUS LS460
LEXUS LS460
|
STEERING CONTROL ECU | Recall the vehicles that are likely to be affected to replace the steering control ECU. | - → - | 48 | |
| 2010-05-26 |
LEXUS - LEXUS LS600h
LEXUS LS600h
|
STEERING CONTROL ECU | Recall the vehicles that are likely to be affected to replace the steering control ECU. | - → - | 48 |