| Fecha de lanzamiento | Marca / Modelo | Problema | Acción correctiva | Periodo de producción | Ref. del fabricante | Vehículos |
|---|---|---|---|---|---|---|
| 2013-05-21 |
IVECO - STRALIS
STRALIS
|
STEERING BOLTS MAY FOUL OTHER COMPONENTS | Recall all affected vehicles to check and if required reposition the hydraulic operating cylinder swivel head. | - → - | 044 | 258 |
| 2013-01-24 |
IVECO - STRALIS
STRALIS
|
LA EFICACIA DEL FRENADO PUEDE VERSE COMPROMETIDA | Replacement of the relay piston / sealing ring on the brake value of the EBS2 (CBU) tractor. | - → - | O33 | 751 |
| 2012-03-15 |
IVECO - STRALIS
STRALIS
|
PNEUMATIC SUSPENSION COULD FAIL | Check the supports for the air bellow manufacturing and casting numbers and replace i required. | - → - | O14 | 366 |
| 2010-10-11 |
IVECO - STRALIS
STRALIS
|
STEERING CONTROL COULD BE LOST | Recall the vehicles that are likely to be affected to check and where necessary replace parts as indicated by the repair procedure issued by the manufacturer. | - → - | O02 | 1722 |
| 2008-03-10 |
IVECO - STRALIS
STRALIS
|
RISK OF INSTABILITY | Recall the vehicles that are likely to be affected to replace both the rear anti roll bar supports. | 2006-12-01 → 2007-01-31 | RCV58 | 32 |
| 2007-08-14 |
IVECO - STRALIS
STRALIS
|
EXHAUST SILENCER RETAINING BOLTS MAY FAIL | Recall the vehicles that are likely to be affected to replace the mounting bolts with new pre-coated bolts (locking compound) and tighten to the correct torque. | 2005-11-01 → 2006-12-31 | 152 | |
| 2007-08-14 |
IVECO - STRALIS
STRALIS
|
EXHAUST SILENCER RETAINING BOLTS MAY FAIL | Recall the vehicles that are likely to be affected to replace the mounting bolts with new pre-coated bolts (locking compound) and tighten to the correct torque. | 2005-11-01 → 2007-01-31 | 152 | |
| 2007-01-31 |
IVECO - STRALIS
STRALIS
|
CAB MAY SHUDDER UNDER EXTREME OPERATING CONDITIONS | Recall affected vehicles and fit new Cab mounting bolts | 2006-05-01 → 2006-10-01 | RCV36 | 114 |
| 2003-05-01 |
IVECO - STRALIS
STRALIS
|
POSSIBLE WATER INGRESS INTO CAB TILT RELAY BOX | Move the relay box from the bottom flange of the chassis to the inside of the chassis frame. | - → - | W83 | 179 |