| Veröffentlichungsdatum | Marke / Modell | Problem | Maßnahme | Bauzeitraum | Hersteller-Ref. | Fahrzeuge |
|---|---|---|---|---|---|---|
| 2012-11-13 |
PEUGEOT - 406
nicht überwacht | Titel der Maßnahme: N/A | Mögliche Eingrenzung der betroffenen Modelle: N/A | Hotline des Herstellers: 08001111999 | Rückrufseite des Herstellers: N/A | Bekannte Vorfälle mit Sach- und/oder Personenschäden: N/A | Überwachung der Rückrufa
|
Bei Betankung mit E10 Kraftstoff kann die Kraftstoffpumpe undicht werden und zu Motoraussetzern führen. | Anbringen des im Schreiben beigelegten Aufklebers auf der Innenseite des Tankdeckels an. Falls das Fahrzeug bislang noch nicht mit E10 betrieben wurde, sind weitere Maßnahmen nicht erforderlich. Sollten das Fahrzeug bereits mit E10 betankt worden sein, sollte das Fahrzeug in der Werkstatt überprüft werden. | 2001-01-01 → 2006-01-01 | HPI PDG | 54 |
| 2009-03-13 |
PEUGEOT - 406
406
|
KRAFTSTOFF KANN AUSLAUFEN | Recalled vehicles will have the subject fuel injection pumps changed. | - → - | 16 | |
| 2006-02-23 |
PEUGEOT - 406
406
|
KRAFTSTOFF KANN AUSLAUFEN | To address the issue recalled vehicles will receive an engine management download. | - → - | X9D | 4338 |
| 2003-09-05 |
PEUGEOT - 406
406
|
POSSIBLE INCORRECT WIRING OF SIDE AIR BAGS AND SEAT BELT PRETENSIONERS | Check and if required change over the wires concerned in the airbag connector. | - → - | XZP | 102 |
| 2003-08-15 |
PEUGEOT - 406
406
|
INCORRECT WIRING OF LATERAL AIRBAGS AND SEAT BELT PRETENSIONERS | Recall affected vehicles and reverse the wires concerned in the Air Bag Connector | - → - | X1J | 35881 |
| 2003-05-13 |
PEUGEOT - 406
406
|
WATER MAY ENTER COOLING FAN - RISK OF FIRE. | Fit a modified cooling fan assembly. | - → - | XZS | 21133 |
| 2001-08-03 |
PEUGEOT - 406
406
|
BRAKE SERVO VACUUM PIPE | Recall affected vehicles replace and reposition the servo vacuum pipe to avoid further chafing. | - → - | XTC | 202 |
| 2001-01-19 |
PEUGEOT - 406
406
|
REAR SUSPENSION FIXING BOLTS | Recall potentially affected vehicles examine the pivot fixing bolts and renew with ones of correct specification where necessary. | - → - | XRF | 3372 |
| 2000-02-01 |
PEUGEOT - 406
406
|
BRAKE PEDAL ASSEMBLY MAY DISENGAGE | Recall affected vehicles and if required replace or tighten the nuts on the pedal return support. | - → - | XPM | 487 |